 |
To fit the termite slab seal simply drill a 14mm or 9/16 hole. After holes have been drilled, simply sweep the concrete dust up & now you are ready to fit the Termite slab seals. |
 |
Fit the termite slab seal into the hole with the fitting tool. Make sure the Termite slab seal is level with the slab/concrete. Your concrete is now 100% sealed. |
 |
Lubricate injection rod with a lubricant,lubrication is only needed at the start & maybe once more during the job. |
 |
Inject chemical at the required PSI rate.In clay you will need to inject at 50-100 PSI. |
 |
After injection move on to the next hole. After injection just wriggle the injection rod up & down a touch & pull injection rod out & move to the next hole. |
 |
Caps need to be lubricated before being placed into termite slab seal. Placing caps can be done after all injection of chemical is completed on the job or as you move on to the next hole. If you wish to have a concrete finish, simply give the seal a tap down 5mm-10mm & add concrete. |
 |
We have found that drilling all the holes first & placing all the termite slab seals in place then injecting will save you time & money. |
If you have any questions please don’t hesitate to contact us at Termite Slab Seal.We are more then happy to help your experience with using Termite Slab Seal to one that will help & change your business forever.
Termite slab seal will save you time, money & most of all you will be performing the absolute best termite perimeter barrier possible.
Remember Termite slab seal can be used in all concrete areas including & not restricted to.. termite perimeter barriers,internal slab injecting,horizontal injection into sub-floors.
Enjoy using Termite slab seal it will lift your business to another level.